Getting Started/Basic Operations
9
Basic Operations
Playing a CD
To turn on the system, press
?/1
(power).
?/1
(power)
To
Do this
Stop play
Press CD
x
.
Pause
Press CD
HS
. The
S
indicator
on the CD
HS
button lights
orange. Press again to resume play.
Select a track
Press MD/CD
.m
or
M>
repeatedly.
Find a point in a
track
Keep pressing MD/CD
.m
or
M>
during play and
release it at the desired point.
“—OVER—” appears at the end
of the CD.
Remove the CD
Press CD
Z
.
Adjust the
volume
Turn VOLUME.
Tips
• If there is no CD in the player, “No Disc” appears
in the display.
• You can switch from another source to the CD
player and start playing a CD just by pressing CD
HS
(
Automatic Source Selection
).
• You can start playing from the desired track in
step 2.
1
Press MD/CD
.m
or
M>
repeatedly
until the desired track appears.
2
Press CD
HS
.
Or, press the number buttons on the remote.
The playback automatically starts. To enter track
numbers 10 or over, press >10 and the track
number. To enter 0, use the 10/0 button.
Notes
• Do not use a CD with tape, seals or paste on it as
this may damage the CD player.
• Do not push the disc tray to close it, as this may
damage the CD player. Press CD
Z
to close the
disc tray.
• If you switch the function to TUNER, “CD”
remains lit in the display even if you remove the
CD. To turn off “CD”, press FUNCTION
repeatedly until a function other than TUNER
appears in the display.
To close the disc tray, press CD
Z
again.
2
Press CD
HS
.
The disc tray closes and play starts.
The
H
indicator on the CD
HS
button
lights green.
Track number
Playing time
With the label side
up. When you play a
single CD, place it
on the inner circle of
the tray.
2
1
FUNCTION
VOLUME
CD
x
MD/CD
.m/M>
1
Press CD
Z
and place a CD on the disc
tray.