The MD Deck
—
Recording
33
5
Press – or + repeatedly until “T.Mark
LSync” appears, then press ENTER/
YES.
“L-SYNC” lights up.
6
Press MENU/NO.
To continue and record, follow the
procedures described on the various
recording pages.
To stop recording
Press
x
.
To change the trigger level for
automatic track marking
Do the procedure below to change the signal level
that triggers automatic track marking.
1
Press MENU/NO during recording pause.
“Setup ?” appears, then press ENTER/YES.
2
Press – or + repeatedly until “LS(T)” appears,
then press ENTER/YES.
3
Press – or + repeatedly to select the level, then
press ENTER/YES.
You can set the level at any value between
–72 dB and 0 dB, in 2 dB steps.
4
Press MENU/NO.
To cancel automatic track
marking
Press – or + repeatedly until “T.Mark Off” appears
in step 5 above, then press ENTER/YES.
“L-SYNC” disappears. When “L-SYNC” is off, a
track number is marked only at the beginning of
each recording.
continued
4,5
3,6
2
1
4,5
4,5
1
Press FUNCTION repeatedly until
“AM” or “FM” appears.
To record from other components connected
to this system, select “TAPE” or “ANALOG
IN”.
2
Press MD
z
REC to stand by for
recording.
3
Press MENU/NO repeatedly until
“Setup Menu” appears.
4
Press – or + repeatedly until “T.Mark
Off” or “T.Mark LSync” appears, then
press ENTER/YES.
