Sony DHC-MD515 - Mini Hi Fi Component System Operating Instructions Manual Download Page 48

Page: 48 / 72

Insert an MD you want to edit (see
page 18).

Press the MD button to switch the
function to MD.

Turn MULTI JOG until the track
number you want to erase appears.

Press EDIT/NO, then turn MULTI
JOG until “Erase ?” appears.

Press ENTER/YES.

“Erase ??” appears.
To cancel erasing, press

Press ENTER/YES again to erase
the track.

“MD Complete” appears for a few
seconds and the selected track and title
are erased.

To cancel the Erase Function

Press

Note

“Erase!! ?” appears when the track was recorded or
edited on another deck and is erase protected. To
erase the track, press ENTER/YES while “Erase!! ?”
appears.

LEVEL SYNC

ALL DISCS

MD1-2

Track number you
want to erase

Erasing all tracks

You can erase the disc title, all recorded
tracks and their titles at once.

Insert an MD you want to edit (see
page 18).

Press the MD button to switch the
function to MD.

While the deck is stopped, press
EDIT/NO, then turn MULTI JOG
until “MD All Erase?” appears.

Press ENTER/YES.

“MD AllErase??” appears.

Press ENTER/YES again.

“MD Complete” appears for a few
seconds and the disc title, all recorded
tracks and their titles are erased.

To cancel the Erase Function

Press

3 4,5

Erasing recordings
(continued)

TAPE

Summary of Contents for DHC-MD515 - Mini Hi Fi Component System









































































Search results

Summary of Contents for DHC-MD515 - Mini Hi Fi Component System

Reviews:

Related manuals for DHC-MD515 - Mini Hi Fi Component System

Brands by name

Popular brands

Sony DHC-MD515 - Mini Hi Fi Component System, Operating Instructions Manual

Search results

Summary of Contents for DHC-MD515 - Mini Hi Fi Component System

Reviews:

Related manuals for DHC-MD515 - Mini Hi Fi Component System

Brands by name

Popular brands