background image

14

Playing an MD

To turn on the system, press POWER.
You can play an MD just like a CD.

2

Press MD 

·∏

 (or MD 

·

 on the

remote).

Play starts. The 

·

 indicator on the

MD 

·∏

 button is lit green.

To

Stop play

Pause

Select a track

Find a point
in a track

Remove the
MD

Adjust the
volume

Do this

Press MD 

π

 (or MD 

p

 on the

remote).

Press MD 

·∏

 (or MD 

P

 on the

remote). The 

 indicator on the

MD 

·∏

 button is lit orange.

Press again to resume play.

Press MD/CD 

=

 

0

 (or

 MD 

=

on the remote) or

 MD/CD 

)

 

+

 (or MD 

+

on the remote) repeatedly until
you find the desired track.

Press MD/CD 

=

 

0

 or

)

 

+

  during play and release

it at the desired point.

Press MD 

§

.

Turn VOLUME (or press
VOL +/–  on the remote).

1

Insert an MD.

With the
arrow
pointing
toward the
deck.

MD 

·

MD 

p

MD 

P

MD 

=

+

VOL +/–

POWER

MD 

§

MD indicator

MD 

π

=

 

0/)+

1

2

POWER

VOLUME

MD/CD

The playing
time

The track
number

LEVEL SYNC

-

TRACK

DBFB

MD

1

0 m

D

5 s

M

3

With the label
side up and the shutter
slide rightward.

Summary of Contents for DHC-MD313 - System Rack



























































Reviews: