![background image](http://html.mh-extra.com/html/sony/dhc-az2d/dhc-az2d_operating-instructions-manual_420506080.webp)
80
GB
C
DVD DIGITAL OUT jack
(DHC-AZ3DM only)
Use a digital optical cord (square, not supplied)
to connect an amplifier with a digital optical
input jack. Sound is then output when the system
function is set to DVD. By connecting this
system to the optical input jack of the optional
amplifier equipped with Dolby Digital or DTS
decoder, you can enjoy the 5.1 channel sound. If
the jack is covered with a cap, remove it before
use.
Note
If you press AUDIO, SOUND FIELD or the buttons
related to karaoke mode, or if you connect or
disconnect microphones or headphones, the sound cuts
off for a moment.
D
COMPONENT VIDEO OUT
jacks
Use an optional video cord to connect a TV. If
your TV accept progressive format file signals,
you must use this connection and set the
PROGRESSIVE setting to “PROGRESSIVE
AUTO” or “PROGRESSIVE VIDEO”
(page 44).
E
S VIDEO OUT jack
Use an S video cord (not supplied) to connect an
optional TV to this jack. You can enjoy higher
quality video images.
F
VIDEO OUT jack
Use a video cable (supplied) to connect the
video input of TV to this jack.
Use buttons on the unit for the operation.
1
Connect audio cords.
See “Hooking up optional components” on
page 79.
2
Touch VIDEO/SAT to switch the
function to “VIDEO” or “SAT”.
3
Start playing the connected
component.
Notes
• If you cannot select “SAT” by touching VIDEO/
SAT, keep touching VIDEO/SAT, then press
?/1
while the power is on. The function will change from
“VIDEO” to “SAT”, and “SAT” will appear in the
display. To change back to “VIDEO”, repeat the
same procedure.
• If the sound is distorted or too loud when “VIDEO”
is selected or you want to switch back to “SAT”,
repeat the operation described above to switch to
“SAT”.
Listening to audio from a
connected component