![background image](http://html.mh-extra.com/html/sony/dhc-az2d/dhc-az2d_operating-instructions-manual_420506010.webp)
10
GB
When connecting a video deck
Connect the TV and the video deck using video and
audio cords (not supplied) as shown below.
When you connect the components as shown above, you
may experience video leakage or hear noise. In this case,
disconnect one of the components.
Note
Do not place the TV on this system.
Tip
For even higher quality video images:
– Use an optional component video cord to connect the
COMPONENT VIDEO input jacks on your TV to
the COMPONENT VIDEO OUT jacks of this
system. If your TV is compatible with progressive
format file signals, use this connection and set
“PROGRESSIVE AUTO” or “PROGRESSIVE
VIDEO” depending on your TV. For details, see “To
change the type of signal output from the system”
(page 44).
– You can use an optional S video cord to connect the
S VIDEO input jack on your TV to the S VIDEO
OUT jack.
4
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Depending on the model, the VOLTAGE
SELECTOR may differ.
5
Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press
?/1
, the system turns on
and the demonstration automatically ends.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
6
Set the color system to PAL or NTSC
depending on the color system of your
TV.
The color system is factory set to NTSC for
region code 3 models, and PAL for other
region code models. Each time you perform
the procedure below, the color system
changes as follows:
NTSC
y
PAL
1
Press
?/1
to turn off the system.
2
Press
?/1
on the unit while touching
X
on the unit.
The system turns on and the color
system is changed.
Notes
• Do not place the surround speakers on top of a TV.*
This may cause distortion of the colors in the TV
screen.
• Be sure to connect both left and right surround
speakers.* Otherwise, the sound will not be heard.
• You cannot set the color system in Power Saving
Mode (page 68).
• When you play back a VIDEO CD recorded in a
different color system from the one you set to the
unit, the picture image may be distorted.
* DHC-AZ7DM only
To connect optional components
TV
Video deck
System
VOLTAGE SELECTOR
220–240V
120V