Sony DG510 - STR AV Receiver, Operating Instructions Manual

Page: 14 / 72

14 GB
a)
The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
• The VIDEO 3 button on the remote is not available
for receiver operation.
1: Installing speakers
This receiver allows you to use a 5.1 channel
system (5 speakers and one sub woofer).
To fully enjoy theater-like multi channel
surround sound requires five speakers (two
front speakers, a center speaker, and two
surround speakers) and a sub woofer (5.1
channel).
Example of a 5.1 channel
speaker system configuration
A
Front speaker (left)
B
Front speaker (right)
C
Center speaker
D
Surround speaker (left)
E
Surround speaker (right)
F
Sub woofer
Tip
Since the sub woofer does not emit highly
directional signals, you can place it wherever you
want.
Name Function
S
-/--
Press -/-- and TV (
M
) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/
x
Press to select
– track numbers over 10 of the
VCR, satellite tuner or CD
player.
– channel numbers of the
Digital CATV terminal.
CLEAR
Press to clear a mistake when
you press the incorrect
numeric button.
T
Numeric
buttons
(number 5
a)
)
Press to
– preset/tune to preset
stations.
– select track numbers of the
CD player, DVD player or
blu-ray disc player. Press 0/
10 to select track number 10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (
M
) at the same time to
select the TV channels.
U
TV INPUT Press TV INPUT and TV (
M
)
at the same time to select the
input signal (TV input or
video input).
SLEEP
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
V
AUTO CAL Press to activate the Auto
Calibration function.