background image

INFORMATION

You are cautioned that any changes or modifications not expressly approved in this 

manual could void your warranty covering this equipment.

Note:

 This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation. 

This equipment generates, uses, and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or more of 

the following measures: 

Re-orient or relocate the receiving antenna. 

Increase the separation between the equipment and receiver. 

Connect the equipment into an outlet on a circuit different from that to which 

 

the receiver is connected. 

Consult the dealer or an experienced radio/TV technician for help.  

  

 

This DVD-ROM Drive Unit is classified as a CLASS 1 

LASER PRODUCT.

The CLASS 1 LASER PRODUCT label is located on the 

top of the drive.

Safety Notice

1. 

Do not install or operate the product in high temperature, humidity or dusty 

 

environment.

2. 

Do not attempt to open the cover to repair the product yourself.

3. 

Never spill liquid of any kind on the product.

4. 

Always follow instructions on this manual under operating the product.

5. 

To prevent exposure to laser emanations (harmful to human eyes), do not 

 

attempt to disassemble this unit.

6. 

Hold CD discs by their edges. Do not touch the surface of the discs.

7. 

The drive is designed to be incorporated into a computer-based system or 

 

unit which has an enclosing cover. Using the drive alone or in any other 

 

configuration is prohibited.

 

Caution:

 

Use of controls or adjustments or performance of procedures other than those 

 

specified herein may result in hazardous radiation exposure.

2

© 2001 - Sony Australia

3

© 2001 - Sony Australia

ACKNOWLEDGMENTS & TRADEMARKS

All contents are subject to change at any time without notice. No responsibility is 

assumed for its use; nor for infringements of patents or other rights of third parties and 

no patent or license is implied hereby.

All trademarks are the property of their respective owners.

 

CLASS 1
LASER PRODUCT

LASER KLASSE 1
PRODUKT

Summary of Contents for DDU1211 Series












Reviews: