Sony DCRHC38 - Handycam DCR HC38 Camcorder Operating Manual Download

Page: 13 / 84

Ge
tt

rte

Recording time

Approximate time (min.) available when
you use a fully charged battery pack.

Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.

Notes

• All times measured under the following

conditions:
Top: Recording with LCD screen.
Bottom: Recording with viewfinder while the
LCD panel closed.

Playing time

Approximate time (min.) available when
you use a fully charged battery pack.

On the battery pack

• Before changing the battery pack, slide the

POWER switch to OFF(CHG).

• The CHG (charge) lamp flashes during

charging, or the Battery Info (p. 12) will not be
correctly displayed under the following
conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.

– The battery pack is worn-out (for Battery Info

only).

• The power will not be supplied from the battery

as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord is disconnected from the wall outlet.

On the charging/recording/playback time

• Times measured with the camcorder at 25 °C

(77 °F). (10 °C to 30 °C (50 °F to 86 °F) is
recommended.)

• The recording and playback time will be shorter

when you use your camcorder in low
temperatures.

• The recording and playback time will be shorter

depending on the conditions under which you
use your camcorder.

On the AC Adaptor

• Use the nearby wall outlet when using the AC

Adaptor. Disconnect the AC Adaptor from the
wall outlet immediately if any malfunction
occurs while using your camcorder.

• Do not use the AC Adaptor placed in a narrow

space, such as between a wall and furniture.

• Do not short-circuit the DC plug of the AC

Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.

• Even if your camcorder is turned off, AC power

(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.

Battery pack

Continuous
recording
time

Typical
recording
time*

NP-FH30
(supplied)

110

NP-FH50

155

180

NP-FH70

330

165

395

195

NP-FH100

760

380

890

445

Battery pack

LCD panel
opened

LCD panel
closed

NP-FH30
(supplied)

105

135

NP-FH50

170

220

NP-FH70

370

465

NP-FH100

845

1065

Summary of Contents for DCRHC38 - Handycam DCR HC38 Camcorder





















































































Search results

Summary of Contents for DCRHC38 - Handycam DCR HC38 Camcorder

Reviews:

Related manuals for DCRHC38 - Handycam DCR HC38 Camcorder

Brands by name

Popular brands

Sony DCRHC38 - Handycam DCR HC38 Camcorder, Operating Manual

Search results

Summary of Contents for DCRHC38 - Handycam DCR HC38 Camcorder

Reviews:

Related manuals for DCRHC38 - Handycam DCR HC38 Camcorder

Brands by name

Popular brands