manualshive.com logo in svg

Sony DCR VX2100 - Handycam Camcorder - 380 KP, Operating Instructions Manual

Share
Download
Sony DCR VX2100 - Handycam Camcorder - 380 KP Operating Instructions Manual Download Page 24

24

Recording a picture

Using the spot light function

This function prevents people’s faces, for example, from appearing excessively white
when shooting subjects lit by strong light, such as in the theater.

Press SPOT LIGHT in standby, recording, or memory mode.
The 

 indicator appears on the LCD screen or in the viewfinder.

To cancel, press SPOT LIGHT again.

If you press one of the following buttons when using the spot light function

The spot light function will be canceled.
– BACK LIGHT
– EXPOSURE

When you manually adjust the exposure

You cannot use the spot light function.

You cannot use the spot light mode while in the following settings:

– Shutter speed value of 1/30 or smaller
– Old movie
– Low lux mode of the PROGRAM AE function

FADER BACK LIGHT SPOT LIGHT

SPOT LIGHT

Summary of Contents for DCR VX2100 - Handycam Camcorder - 380 KP

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands