manualshive.com logo in svg

Sony DCR VX2100 - Handycam Camcorder - 380 KP, Operating Instructions Manual

Share
Download
Sony DCR VX2100 - Handycam Camcorder - 380 KP Operating Instructions Manual Download Page 13

13

Getting Started

Step 1  Preparing the power supply

Connecting to a wall outlet

When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC Adaptor.

(

1

)

Open the DC IN jack cover and connect the AC Adaptor to the DC IN jack on
your camcorder with the plug’s 

v

 mark facing toward the LCD panel side.

(

2

)

Connect the power cord to the AC Adaptor.

(

3

)

Connect the power cord to a wall outlet.

Precaution

The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.

Notes

•The power cord must only be changed at an authorized service shop.
•AC Adaptor can supply power even if the battery pack is attached to your camcorder.
•The DC IN jack has source priority. This means that the battery pack cannot supply

any power if the power cord is connected to the DC IN jack, even when the power
cord is not plugged into a wall outlet.

Using a car battery

Use the Sony DC Adaptor/Charger (optional).

1

2

Summary of Contents for DCR VX2100 - Handycam Camcorder - 380 KP

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands