
2-8
DCR-TRV60/TRV60E/TRV70
2-7. EVF BLOCK ASSEMBLY
A
B
1
Screw
(M1.7
×
2.5),
lock ace, p2
6
Two
screws
(M1.7
×
2.5),
lock ace, p2
7
screw
(M1.7
×
2.5),
lock ace, p2
3
Screw
(M1.7
×
2.5),
lock ace, p2
Caution
Caution
8
FP-659 flexible board (16P)
q;
EVF escutcheon
EVF escutcheon
Hole
5
Tape (A)
Tape (A)
Protrusion
The EVF escutcheon comes off
when the EVF block assembly is
removed because it is not
retained by anything any more.
Be careful not to lose the EVF
escutcheon. Install it as shown
for re-assembly.
2
Slide the EVF block in the
direction of the arrow
A
as
far as it can go.
Attach the tape (A) as shown.
9
Remove the EVF block assembly in the
direction of the arrow.
4
Raise the capacitor of the stroboscope
block in the direction of the arrow
B
.
www.freeservicemanuals.info
Digitized in Heiloo Netherland