Sony DCR-TRV130 - Digital8 Camcorder, Service Manual

Page: 162 / 165

— 8 —
DCR-TRV130/TRV130E
1-3. CAMERA SYSTEM ADJUSTMENTS
Before perform the camera system adjustments, check that the
specified values of “VIDEO SYSTEM ADJUSTMENTS” are
satisfied.
Page
5-13
Type M
: Added portion.
1. HALL Adjustment
For detecting the position of the lens iris, adjust AMP gain and
offset.
Subject Not required
Measurement Point Display data of page 1 (Note1)
Measuring Instrument Adjustment remote commander
Adjustment Page F
Adjustment Address 38, 39, 3A
Specified Value 1 88 to 8C
Specified Value 2 15 to 19
0-1. Lens Type Input
Distinguish the type of the lens being used for the camcorder,
and input data corresponding to the type.
Subject Not required
Measurement Point Display data of page 1 (Note)
Measuring Instrument Adjustment remote commander
Adjustment Page E F
Adjustment Address 5C, 5D, 5E, 5F 2C
Note: Displayed data of page 1 of the adjustment remote commander.
1 : XX : XX
Display data
Adjusting method:
Order Page Address Data Procedure
1 0 01 01 Set the data.
2 6 01 65 Set the data, and press PAUSE button.
3 0 03 19 Set the data.
4 1 Check that the data.
When the data is “0000”, proceed
to step 5. (Glass lens type)
When the data is “0001”, proceed
to step 11. (Plastic lens type)
5 E 5C 21 Set the data, and press PAUSE button.
6 E 5D 84 Set the data, and press PAUSE button.
7 E 5E FC Set the data, and press PAUSE button.
8 E 5F F7 Set the data, and press PAUSE button.
9 F 2C D6 Set the data, and press PAUSE button.
10 Proceed to step 16.
11 E 5C 22 Set the data, and press PAUSE button.
12 E 5D 51 Set the data, and press PAUSE button.
13 E 5E FD Set the data, and press PAUSE button.
14 E 5F C4 Set the data, and press PAUSE button.
15 F 2C D7 Set the data, and press PAUSE button.
16 6 01 00 Set the data, and press PAUSE button.
17 0 03 00 Set the data.
18 0 01 00 Set the data.
0-2. CCD Imager Type Input (DCR-TRV130 (NTSC))
Distinguish the type of the CCD imager used for the camcorder,
and input data corresponding to the type.
Subject Not required
Measurement Point Display data of page 6 (Note)
Measuring Instrument Adjustment remote commander
Adjustment Page 7 F
Adjustment Address A2, A3 3B, DD DF, FB
Adjusting method:
Order Page Address Data Procedure
1 0 01 01 Set the data.
2 6 04 Check that the data is “00” to “21”.
3 Check that the type of the CCD
imager.
When the CCD type M is used,
proceed to step 4.
When the CCD type S is used,
proceed to step 11.
4 7 A2 57 Set the data, and press PAUSE button.
5 7 A3 88 Set the data, and press PAUSE button.
6 F 3B 70 Set the data, and press PAUSE button.
7 F DD 52 Set the data, and press PAUSE button.
8 F DF E0 Set the data, and press PAUSE button.
9 F FB 81 Set the data, and press PAUSE button.
10 Proceed to step 17.
11 7 A2 00 Set the data, and press PAUSE button.
12 7 A3 00 Set the data, and press PAUSE button.
13 F 3B 4A Set the data, and press PAUSE button.
14 F DD 72 Set the data, and press PAUSE button.
15 F DF D0 Set the data, and press PAUSE button.
16 F FB 01 Set the data, and press PAUSE button.
17 0 01 01 Set the data.