Sony DCR-PC110E, Service Manual, Page: 122 / 187

5-17
4. MR Adjustment
The MR (Magnet resistor) adjustment of the inner focus lens is
carried out automatically. In whichever case, the focus will be
deviated during auto focusing/manual focusing.
Subject Not required
Measurement Point Adjustment remote commander
Measuring Instrument
Adjustment Page F
Adjustment Address 50 to 59, 62
Specified Value1 40 to C0
Specified Value2 03 to 78
Specified Value3 88 to F8
Note1: Make the lens horizontal and perform this adjustment.
Note2: Perform this adjustment before “Flange Back Adjustment”.
Note3: Check that the data of page: 6, address: 02 is “00”. If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01 Set the data.
2 6 01 BD Set the data, and press PAUSE
button.
3 6 02 Check that the data changes to
“01”.(Note4)
4 F 50 Check that the data satisfies the
specified value 1.
5 F 51 Check that the data satisfies the
specified value 1.
6 F 52 Check that the data satisfies the
specified value 2.
7 F 53 Check that the data satisfies the
specified value 3.
8 F 54 Check that the data satisfies the
specified value 2.
9 F 55 Check that the data satisfies the
specified value 3.
10 F 56 Check that the data satisfies the
specified value 2.
11 F 57 Check that the data satisfies the
specified value 3.
12 F 58 Check that the data satisfies the
specified value 2.
13 F 59 Check that the data satisfies the
specified value 3.
Note4: The adjustment data will be automatically input to page: F, address:
50 to 59, 62.
Processing after Completing Adjustments:
Order Page Address Data Procedure
1 6 01 00 Set the data, and press PAUSE
button.
2 0 01 00 Set the data.