Troubleshooting
120
A title is not recorded/A cassette label
is not recorded.
c
Use a cassette with Cassette Memory. (p. 126)
c
Erase unnecessary titles when the Cassette Memory is full. (p. 82)
c
Set the write-protect tab to REC. (p. 126)
• A title cannot be added to a blank section of the tape.
The title is not displayed.
c
Set [
TITLE DISP] to [ON] in the
(EDIT/PLAY) menu.
• The title cannot be displayed during Easy Handycam operation.
The title cannot be deleted.
c
Set the write-protect tab to REC. (p. 126)
The Title search does not work.
c
Enter a title if there is no title on the tape. (p. 81)
c
Use a cassette with Cassette Memory. (p. 126)
c
Set [
SEARCH] to [ON] in the
(EDIT/PLAY) menu. (p. 81)
• There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
Still pictures cannot be dubbed from a
tape to a “Memory Stick Duo.”
• You cannot record or a distorted picture may be recorded if the tape has
been used repeatedly for recording.
Movies cannot be dubbed from a tape
to a “Memory Stick Duo.”
• You cannot record or a distorted picture may be recorded in the
following:
– The tape has a blank section.
– The tape has been used repeatedly for recording.
– Input signal has been interrupted or cut.
Digital program editing on the tape
does not function.
c
Set the input selector on the VCR correctly, then check the connection
between your camcorder and the VCR. (p. 93)
c
When your camcorder is connected to a DV device that is not a Sony
product via an i.LINK cable, select [IR] in step11 of “Step 1: Preparing
your camcorder and VCR for operation” (p. 98).
c
Adjust the synchronization of the VCR. (p. 101)
c
Enter a correct [IR SETUP] code. (p. 100)
c
Select the mode used to cancel recording pause again. (p. 100)
c
Set your camcorder and the VCR more than 30 cm (12 in.) apart. (p. 100)
• The program cannot be set to a blank section on the tape.
The VCR is not responding properly
during Digital program editing when
it is connected via an i.LINK cable.
• While connecting via an i.LINK cable, select [IR] in step 11 of “Step 1:
Preparing your camcorder and VCR for operation” (p. 98).
Digital program editing on the
“Memory Stick Duo” does not
function correctly.
• The program cannot be set to a blank section on the tape.
• You cannot record or a distorted picture may be recorded if the tape has
been used repeatedly for recording.
Symptom
Cause and/or Corrective Actions
