Tro
ubl
es
hoo
tin
g
Troubleshooting
119
Dubbing/Editing
Cannot delete all pictures at once.
c
When you are using the “Memory Stick Duo” with the write-protect tab,
release the lock on the write-protect tab of the “Memory Stick Duo.”
(p. 128)
c
Cancel image protection on the picture. (p. 108)
Image protection cannot be applied.
c
When you are using the “Memory Stick Duo” with the write-protect tab,
release the lock on the write-protect tab of the “Memory Stick Duo.”
(p. 128)
c
Perform the operation again on the index screen. (p. 108)
Cannot mark pictures for print.
c
When you are using the “Memory Stick Duo” with the write-protect tab,
release the lock on the write-protect tab of the “Memory Stick Duo.”
(p. 128)
c
Perform the operation again on the index screen. (p. 109)
• The maximum number of pictures you can mark for print is 999.
• Movies cannot be marked for print.
The data file name is not indicated
correctly.
• Only the file name is displayed if the directory structure does not
conform to the universal standard.
• The file is damaged.
• The file format is not supported on your camcorder. (p. 127)
The data file name flashes.
• The file is damaged.
• The file format is not supported on your camcorder. (p. 127)
Symptom
Cause and/or Corrective Actions
Pictures from connected devices are
not displayed on the LCD screen or
the viewfinder.
• Cannot change the setting of the AUDIO/VIDEO jack during Easy
Handycam operation.
c
Cancel Easy Handycam operation (p. 54), and then set [VIDEO
INPUT] to the appropriate signal in the
(STANDARD SET)
menu. (p. 86)
c
Set [VIDEO INPUT] to the appropriate signal in the
(STANDARD
SET) menu. (p. 86)
c
Set [DISPLAY] to [LCD PANEL] in the
(STANDARD SET)
menu. (p. 88)
Cannot dub correctly using the A/V
connecting cable.
c
Set [VIDEO INPUT] to the appropriate signal in the
(STANDARD
SET) menu. (p. 86)
c
Set [DISPLAY] to [LCD PANEL] in the
(STANDARD SET)
menu. (p. 88)
• The A/V connecting cable is not connected properly.
c
Make sure that the A/V connecting cable is connected to the proper
jack, i.e. to the output jack of a device you are dubbing a picture from,
or to the input jack of another device for dubbing a picture from your
camcorder.
Pictures from connected devices are
not displayed correctly.
• The input signal is not NTSC. (p. 95)
New sound added to a recorded tape
is not heard.
c
In the
(STANDARD SET) menu, adjust [AUDIO MIX] from the
[ST1] (original sound) side until the sound is heard appropriately. (p. 85)
Symptom
Cause and/or Corrective Actions
,
continued
