Sony DCR-HC1000 - Digital Handycam Camcorder Operation Manual Download Page 19

Page: 19 / 140

Getting started

Get
ting st

art
e

Step 6: Inserting the
recording media

Inserting a cassette tape

You can use mini DV

cassettes only.

For details on these cassettes (such as write-
protection), see page 120.

Note

• Do not force the cassette into the compartment. This

may cause a malfunction of your camcorder.

Slide the

OPEN/EJECT lever in the

direction of the arrow and open the lid.

The cassette compartment automatically
comes out and opens up.

Insert a cassette with its window-side
facing out.

Press .

The cassette compartment automatically
slides back in.

Close the lid.

To eject the cassette

Slide the

OPEN/EJECT lever and

open the lid.
The cassette compartment automatically
comes out and opens up.

Take out the cassette, then press

The cassette compartment automatically
slides back in.

Close the lid.

Lid

OPEN/EJECT lever

Window-side

Push the center of
the back of the
cassette lightly.

Summary of Contents for DCR-HC1000 - Digital Handycam Camcorder













































































































































Search results

Summary of Contents for DCR-HC1000 - Digital Handycam Camcorder

Reviews:

Sony DCR-HC1000 - Digital Handycam Camcorder, Operation Manual, Page: 19 / 140

Search results

Summary of Contents for DCR-HC1000 - Digital Handycam Camcorder

Reviews: