Sony DCR-HC1000 - Digital Handycam Camcorder Page 112 Operation Manual Download

Page: 112 / 140

Troubleshooting

112

Dubbing/Editing

Cannot mark pictures for print.

When you are using the “Memory Stick Duo” with the write-protect tab,
release the lock on the write-protect tab of the “Memory Stick Duo.”
(p. 122)

Perform the operation again on the index screen. (p. 102)

• The maximum number of pictures you can mark for print is 999.
• Movies cannot be marked for print.

The data file name is not indicated
correctly.

• Only the file name is displayed if the directory structure does not

conform to the universal standard.

• The file is damaged.
• The file format is not supported on your camcorder. (p. 121)

The data file name flashes.

• The file is damaged.
• The file format is not supported on your camcorder. (p. 121)

Symptom

Cause and/or Corrective Actions

Pictures from connected devices are
not displayed on the LCD screen or
the viewfinder.

Set [VIDEO INPUT] to the appropriate signal in the

(STANDARD

SET) menu. (p. 78)

Set [DISPLAY] to [LCD PANEL] in the

(STANDARD SET)

menu. (p. 80)

Cannot dub correctly using the A/V
connecting cable.

Set [VIDEO INPUT] to the appropriate signal in the

(STANDARD

SET) menu. (p. 78)

Set [DISPLAY] to [LCD PANEL] in the

(STANDARD SET)

menu. (p. 80)

• The A/V connecting cable is not connected properly.

Make sure that the A/V connecting cable is connected to the proper
jack, i.e. to the output jack of a device you are dubbing a picture from,
or to the input jack of another device for dubbing a picture from your
camcorder.

Pictures from connected devices are
not displayed correctly.

• The input signal is not NTSC. (p. 119)

New sound added to a recorded tape
is not heard.

In the

(STANDARD SET) menu, adjust [AUDIO MIX] from the

[ST1/FRONT] (original sound) side until the sound is heard
appropriately. (p. 77)

A title is not recorded/A cassette label
is not recorded.

Use a cassette with Cassette Memory. (p. 120)

Erase unnecessary titles when the Cassette Memory is full. (p. 74)

Set the write-protect tab to REC. (p. 120)

• A title cannot be added to a blank section of the tape.

The title is not displayed.

Set [

TITLE DISP] to [ON] in the

(EDIT/PLAY) menu.

(p. 75)

The title cannot be deleted.

Set the write-protect tab to REC. (p. 120)

Symptom

Cause and/or Corrective Actions

Summary of Contents for DCR-HC1000 - Digital Handycam Camcorder













































































































































Search results

Summary of Contents for DCR-HC1000 - Digital Handycam Camcorder

Reviews:

Related manuals for DCR-HC1000 - Digital Handycam Camcorder

Brands by name

Popular brands

Sony DCR-HC1000 - Digital Handycam Camcorder, Operation Manual

Search results

Summary of Contents for DCR-HC1000 - Digital Handycam Camcorder

Reviews:

Related manuals for DCR-HC1000 - Digital Handycam Camcorder

Brands by name

Popular brands