78
GB
x
BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set [TEST
TONE] to [ON] for easy adjustment.
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press VOL +/–.
x
TEST TONE
The speakers will emit a test tone to adjust
[LEVEL] and [BALANCE].
Adjusting the speaker
balance and level by using the
test tone
1
Press DVD SETUP in stop mode.
The Setup Display appears.
2
Press
X
/
x
repeatedly to select
[SPEAKER SETUP], then press ENTER
or
c
.
3
Press
X
/
x
repeatedly to select [TEST
TONE], then press ENTER or
c
.
4
Press
X
/
x
repeatedly to select [ON],
then press ENTER.
You will hear the test tone from each
speaker in sequence.
5
From your listening position, adjust the
value of [BALANCE] and [LEVEL] using
C
/
X
/
x
/
c
.
When selecting [BALANCE], the test tone
is emitted from both left and right speakers
simultaneously.
When selecting [LEVEL], the test tone is
emitted from only the speaker which you
are adjusting.
6
Press ENTER when you have finished
making adjustments.
7
Press
X
/
x
repeatedly to select [TEST
TONE], then press ENTER.
8
Press
X
/
x
repeatedly to select [OFF],
then press ENTER.
Notes
• When you adjust the speaker settings, the sound cuts
off for a moment.
• The surround back speaker level can be also adjusted
on the amplifier that is connected to the surround
back speaker.
Tip
To adjust the balance or the level without listening to
the test tone, select [BALANCE] or [LEVEL] in step 3
and press ENTER. Then adjust the balance or level
using
X
/
x
and press ENTER.
FRONT
(CENTER)
Adjusts the balance between the front
left and right speakers.
The center position is shown as
“---.” (You can adjust from the center 6
steps to left or right.)
OFF
The test tone is not emitted from the
speakers.
ON
The test tone is emitted from both left and
right speakers simultaneously while
adjusting balance. When you select one of
the [SPEAKER SETUP] items, the test
tone is emitted from each speaker in
sequence.
