Sony DAV-LF1 Operating Instructions Manual Download

Page: 86 / 120

You can change the brightness of the front panel
display by two steps.

Press AMP MENU.

Press

repeatedly until

“Customize”

appears in the front

panel display, then press ENTER or

The system enters the Customize Menu
mode.

Press

repeatedly until

“Dimmer”

appears in the front panel display, then
press ENTER or

Press

to select the brightness of

the front panel display.

Press AMP MENU.

Turns off the AMP menu.

You can return the system parameters such as
speaker settings and preset stations, to the
default settings.

Press and hold Touch Panel Sensor VOL. –
(page 43) and

simultaneously for a few

seconds.

“Cold Reset” appears in the front panel display
and the default settings are returned.

Changing the Brightness
of the Front Panel Display

AMP MENU

C/X/x/c/

ENTER

With cover opened.

Returning to the Default
Settings

VOL

FUN

CTION

Touch
Panel
Sensor
VOL. –

Summary of Contents for DAV-LF1

























































































































Search results

Summary of Contents for DAV-LF1

Reviews:

Related manuals for DAV-LF1

Brands by name

Popular brands

Sony DAV-LF1, Operating Instructions Manual

Search results

Summary of Contents for DAV-LF1

Reviews:

Related manuals for DAV-LF1

Brands by name

Popular brands