80
GB
* Except for North American models.
Operation
Point the remote at the TV and
on the remote
sensor, then press SONY TV DIRECT
(THEATRE SYNC) once.
While transmitting the code from the remote, the
TV button flashes.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
To change the transmit time
Press and hold TV CH + while entering the
code for transmit time (see table below) using
the number buttons.
The transmit time from the remote is selected.
If you successfully set the transmit time code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes five times
quickly.
Notes
• This function is only for SONY TVs.
(This function may not work on some SONY TVs.)
• If distance between TV and this system is too far, this
function may not work. Install the system near the
TV.
• Keep the remote pointed in the direction of the TV
and this system while the TV button is flashing.
By pressing Number
TV’s input source
TV/VIDEO
0
No input source
(Default)
1
VIDEO1
2
VIDEO2
3
VIDEO3
4
VIDEO4
5
VIDEO5
6
VIDEO6
7*
COMPONENT1
INPUT
8*
COMPONENT2
INPUT
By pressing Number
Transmit time
TV CH+
1
0.5 (Default)
2
1
3
1.5
4
2
5
2.5
6
3
7
3.5
8
4
Summary of Contents for DAV-LF1
Page 1: ... 2005 Sony Corporation 2 591 181 12 1 DVD Home Theatre System Operating Instructions DAV LF10 ...
Page 118: ......
Page 119: ......
