Ad
dit
ion
al I
n
fo
rmatio
n
97
GB
Mass (approx.)
1.6 kg
3.5 kg with stand (long)
3.0 kg with stand (short)
Center
Speaker system
Closed, magnetically
shielded
Speaker unit
30 × 80 mm dia. cone type
Rated impedance
3.0 ohms
Dimensions (approx.)
380 × 47 × 61 mm
(w/h/d)
Mass (approx.)
0.5 kg
Subwoofer
Speaker system
Bass reflex, magnetically
shielded
Speaker unit
200 mm dia. cone type
Rated impedance
1.5 ohms
Dimensions (approx.)
170 × 396 × 442 mm
(w/h/d)
Mass (approx.)
8.1 kg
General
Power requirements
Latin American models:
110 - 240 V AC, 50/60 Hz
Mexican models:
120 V AC, 60 Hz
Taiwan models:
120 V AC, 50/60 Hz
Other models:
220 - 240 V AC, 50/60 Hz
Power consumption
On: 170 W
Standby: 0.3 W (at the
Power Saving Mode)
Dimensions (approx.)
445 × 71 × 400 mm
(w/h/d) incl. projecting
parts
Mass (approx.)
6.0 kg
Surround amplifier (TA-WR4)
Surround mode (reference) RMS output power, 10 %
THD
Latin American models:
130 W + 130 W
(with SS-TS55,
SS-TS56W)
Mexican, Argentine, and other models:
140 W + 140 W
(with SS-TS55,
SS-TS56W)
Power requirements
Latin American models:
110 - 240 V AC, 50/60 Hz
Mexican models:
120 V AC, 60 Hz
Taiwan models:
120 V AC, 50/60 Hz
Other models:
220 - 240 V AC, 50/60 Hz
Power consumption
50 W
Dimensions (approx.)
280 × 60 × 280 mm (w/h/d)
Mass (approx.)
1.6 kg
Design and specifications are subject to change
without notice.
Unpacking
• Speakers (5)
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (5 m
×
5, 3 m
×
1)
• Speaker cords (OPTION) (15 m
×
2)
1)
• Video Cord (1)
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Foot pads (1 set)
• Posts (long × 4, short × 4)
• Bases (4)
• Pedestal (4)
• Screws with washer (short) (8)
• Screws with washer (long) (24)
• Surround amplifier (1)
• Speaker base (1)
• Spacers (8)
• Guide pins (4)
• Screws (8)
• IR transmitter (1)
2)
• IR receiver cord (1)
2)
• Microphone (1)
3)
• Operating Instructions
• Speaker and TV connections (card) (1)
1)
Use for connecting the surround speakers to the
system by the speaker cords.
2)
The IR receiver cord and IR transmitter are for this
system only. You cannot use a commercially
available extension cord.
3)
Russian models only
