64
GB
Preset radio stations in the system’s memory
first (see “Presetting Radio Stations” (page 63)).
1
Press FU/– repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
The last received station is tuned in.
2
Press or – repeatedly to
select the preset station you want.
Each time you press the button, the system
tunes in one preset station.
3
Adjust the volume by pressing
/–.
To turn off the radio
Press
"
/
1
.
To listen to non-preset radio
stations
Use manual or automatic tuning in Step 2.
For manual tuning, press or –
repeatedly.
For automatic tuning, press and hold
or –. The automatic tuning stops automatically
when the system receives the radio station. To
stop the automatic tuning manually, press
or –.
To listen to radio stations when
you know the frequencies
Use direct tuning in Step 2.
1
Press D.TUNING.
2
Press the number buttons to select the
frequency number you want to listen to.
3
Press .
Tip
• If an FM program is noisy, press MENU, and select
“FM Mode?” by pressing
X
/
x
, then press
. Press
X
/
x
to select “MONO,” then press
. There will be
no stereo effect, but the reception will improve. To
restore the stereo effect, select “STEREO.”
• To improve reception, reorient the supplied antennas
(aerials).
Naming preset stations
You can enter a name for preset stations. These
names (for example, “XYZ”) appear in the
system’s front panel display when a station is
selected.
Note that no more than one name can be entered
for each preset station.
1
Press FU/– repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
The last received station is tuned in.
2
Press or – repeatedly to
select the preset station you want to
create an index name for.
3
Press MENU.
4
Press
X
/
x
repeatedly until “Name In?”
appears in the front panel display.
5
Press .
6
Create a name by using the cursor
buttons.
Press
X
/
x
to select a character, then press
c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
If you make a mistake
Press
C
/
c
repeatedly until the character to
be changed flashes, then press
X
/
x
to select
the desired character.
To erase the character, press
C
/
c
repeatedly until the character to be erased
flashes, then press CLEAR.
7
Press .
“Complete!” appears in the front panel
display, and the station name is stored.
Tip
• You can check the frequency by pressing DISPLAY
repeatedly (page 65).
Listening to the Radio
