Sony DAV-FX500 - Dvd Dream System Page 61 Operating Instructions Manual Download

Page: 61 / 104

ner Fu

ncti

ons

You can select a preset channel from 1 to
30.

Note

• The preset channel information will be updated

depending on the service provided by the XM
Satellite Radio Inc. that you have subscribed to.

• When the XM Radio ID appears in the front panel

display (“channel 0” is selected) (page 59), the
MENU button is not available, and you cannot preset
XM Radio channels. The XM Radio ID disappears
when other than “channel 0” is selected.

XM Radio messages list

Message appears Explanation/Remedies

ANTENNA

The XM antenna is not
connected or transmission is not
being received properly.

Make sure that the antenna is
securely connected.
Try to disconnect the
antenna then reconnect, or
turn off the power then turn
back on.

UPDATING

The encryption code is being
updated.

Wait until the encryption
code has been updated.

NO SIGNAL

The signal strength is too weak.

Adjust the antenna so that
the signal strength is as
strong as possible.

The audio channel or
information is being acquired.

Wait until the audio channel
or information has been
acquired.

OFF AIR

The selected channel is off the
air.

Make sure that you selected
the channel properly.
Try to select another
channel.

----

There is no characteristic
information such as an artist
name, song title or program title
available.

The preset number entered is
invalid number.

Enter a number from 1 to 30.

CH ---

The selected channel is not
available.

Summary of Contents for DAV-FX500 - Dvd Dream System









































































































Search results

Summary of Contents for DAV-FX500 - Dvd Dream System

Reviews:

Related manuals for DAV-FX500 - Dvd Dream System

Brands by name

Popular brands

Sony DAV-FX500 - Dvd Dream System, Operating Instructions Manual

Search results

Summary of Contents for DAV-FX500 - Dvd Dream System

Reviews:

Related manuals for DAV-FX500 - Dvd Dream System

Brands by name

Popular brands