1-7
PCM-3348HR
(4) Insert the supplied power cord into the remote control
unit’s AC inlet and plug holder. Pass the cord through
the supplied wire stopper. Secure the wire stopper to
the rear of the top plate with the supplied screw (
+
B4
x
8).
(5) Secure the power cord with the cord clamp located at
the bottom of the top plate.
(6) Secure the remote cable and the power cord with the
cord clamp on the leg.
Assembled Unit
3
Lock.
2
Insert the power cord.
1
Insert the remote cable.
Cord clamper
Leg assy
1-4. Installing the Remote Control Unit on the Remote Stand
AC inlet
Wire stopper
Power cord
+
B4
x
8
Plug holder
(Supplied)
2
Lock.
1
Insert the
remote cable.
Cord clamper
