DSC-W530_L2
1-8
1-10. DC MOTOR WORM A ASSY REPLACING METHOD
1-11. CAM TUBE BLOCK ASSY AND STRAIGHT TUBE LUBRICATED ASSY AND
1 GROUP FRAME REPLACING METHOD
Removal
1
Remove four screws, and remove the Rear Mirror Plate.
3
Peel off the FG Seal.
2
Remove the Naruto Gear Lubricated Assy and Warm B Lubricated Assy.
4
Remove two screws.
5
Remove the two soldering, and remove the DC Motor Worm A Assy.
4
Install the Naruto Gear Lubricated Assy and Warm B Lubricated Assy.
1
Solder the two locations.
2
Install the DC Motor Worm A Assy with two screws.
*
Tightening torque = 0.049
±
0.01N
•
m (0.5
±
0.1kgf
•
cm)
3
Put the FG Seal.
5
Install the Rear Mirror Pl ate with the four screws in the order of numbers.
*
Tightening torque = 0.049
±
0.01N
•
m (0.5
±
0.1kgf
•
cm)
Installation
Screw
Screw
Screw
Screw
Rear Mirror Plate
Naruto Gear
Lubricated Assy
Warm B
Lubricated Assy
4
1
2
3
Screw
Screw
Screw
FG Seal
Screw
Screw
Screw
Rear Mirror Plate
Naruto Gear
Lubricated Assy
Warm B
Lubricated Assy
Solders
DC Motor Worm A Assy
Screw
Screw
FG Seal
Solders
DC Motor Worm A Assy
5
Remove the Naruto Gear Lubricated Assy.
Removal
1
Remove four screws, and remove the Rear Mirror Plate.
2
Remove the 3 Group Frame.
3
Remove the 3 Group Spring.
4
Disconnect the Iris Flexible Board from connector of 2 Frame Assy.
Screw
Screw
Screw
Screw
Rear Mirror Plate
Iris Flexible Board
Flexible Board
of 2 Frame Assy
3 Group Frame
3 Group
Spring
3 Group Frame
3 Group Spring
Warm B
Lubricated Assy
