charged. The battery life and number of images may decrease depending on the
conditions of use.
The battery life and number of images that can be recorded is for shooting under the
following conditions:
The battery pack is used at an ambient temperature of 25°C (77°F).
Using Sony Memory Stick PRO Duo (Mark2) media (sold separately)
[Display Quality]: [Standard]
The number for "Shooting (still images)" is based on the CIPA standard, and is for
shooting under the following conditions (CIPA: Camera & Imaging Products Association):
DISP: [Display All Info.]
One picture is taken every 30 seconds.
The zoom is switched alternately between the W and T ends.
The flash strobes once for every two pictures.
The power is turned on and off once every ten times.
The number of minutes for movie shooting is based on the CIPA standard, and is for
shooting under the following conditions:
The image quality is set to 60i 17M (FH) .
Actual shooting (movies): Battery life based on repeated shooting, zooming, shooting stand-by,
turning on/off, etc.
Continuous movie shooting: Battery life based on non-stop shooting until the limit (29 minutes) has
been reached, and then continued by pressing the MOVIE button again. Other functions, such as
zooming, are not used.
If the remaining battery is not displayed, press the DISP (Display Setting).
[11] How to Use
Preparing the camera
Charging the battery pack
Supplying power from a wall outlet (wall socket)
If you use an AC-UD10 AC adaptor (sold separately) that is compatible with shooting and
playback, power will be supplied to the camera via the AC adaptor when you are using the
camera without using up the battery power.
1. To supply power to the camera during shooting/playback, connect the camera to the
AC adaptor AC-UD10 (sold separately) and plug the AC adaptor into a wall outlet (wall
socket).
Note
You can shoot or play back images while the supplied AC adaptor is connected to the
camera. However, the camera will turn off when the battery pack is completely
discharged.
