23
x
Printed results
The printed pictures are poor in quality.
•
Dust is on the ink ribbon. Wipe the plastic part of the ink ribbon and remove dust.
•
Dust or fingerprints are imprinted on the printed surface. Do not touch the printing surface
(the glossy side with no imprint). Fingerprints on the printing surface may result in imperfect
printing.
•
Used print paper or ink ribbon is being used again. Do not use a used print paper. Printing an
image twice on the same paper will not make the printed image thicker. Doing so may cause a
malfunction.
The picture quality and colors of the image previewed on the screen of the
camera differ from the ones actually printed.
•
Colors and quality of an image varies depending on the characteristics of the monitor or the
LCD screen. The image displayed on the screen is used as reference only.
The image is not printed full size within print range.
•
The print range differs depending on the image size. See page 30.
The printed image is crooked.
•
The paper tray is not inserted properly. Re-insert the paper tray firmly and straight until it
reaches the end.
An image rotated on the camera does not appear as it is on the print paper.
•
When you try to print a rotated image, the printer prints the image before the rotation.
x
Viewing images with the TV
Images/sounds cannot be played back on a TV.
•
The audio cannot be output when only the component video cable is connected. Connect the
A/V connecting cable to the audio jack corresponding to the component video jack.
•
The HD component video out setting of the camera may not be correct. Refer to the operating
instructions supplied with the camera, and set the “COMPONENT” setting correctly.
Images cannot be output via the A/V connecting cable.
•
If the component video cable is connected to the printer and the TV, unplug the component
video cable from the printer.
Summary of Contents for Cyber-shot DSC-W80HDPR
Page 31: ......
