2-12
DSC-W300_L2
q;
Naruto Shaft
q;
Naruto Washer
Naruto
Washer
Install the naruto washer in the direction
shown in the figure.
q;
Naruto Gear (S)
q;
Screws
qa
Screws
qa
Barrier Assy
q;
Zoom (1210)
Gear Block Assy
q;
With the lens set to the "Tele end", install the naruto shaft, naruto washer, naruto gear (S) and zoom (1210) gear block assy
in order. Then, fix the zoom (1210) gear block assy with two screws.
*Tightening torque=0.049
±
0.01N•m(0.5
±
0.1kgf•cm)
qa
Remove two screws, and remove the barrier assy.
*Discard the removed barrier assy.
