13
Basic techniques for better images
The eyes of the subject may come out red, or fuzzy white circular spots may appear when
using the flash. These phenomena can be reduced by taking the following steps.
The “Red-eye phenomenon”
Pupils become dilated in dark environments. Flash light is reflected off the blood vessels at the
back of the eye (retina), causing the “red-eye” phenomenon.
How can the “Red-eye phenomenon” be reduced?
• Set [Red Eye Reduction] to [On] (page 63).
• Select
(High Sensitivity) mode
*
or
(Extra High Sensitivity) mode
*
in Scene Selection (page 29).
(The flash is turned off automatically.)
• When the eyes of the subject turn out red, correct the image with [Retouch] on the viewing menu
(page 72) or with the supplied software “Picture Motion Browser”.
The “White circular spots”
This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are
accentuated by the camera’s flash, they appear as white circular spots.
How can the “White circular spots” be reduced?
• Light the room and shoot the subject without a flash.
• Select
(High Sensitivity) mode
*
or
(Extra High Sensitivity) mode
*
in Scene Selection. (The flash
is turned off automatically.)
Flash
On using the flash
*
Even though you selected
(High Sensitivity) mode or
(Extra High Sensitivity) mode in Scene
Selection, the shutter speed might be slower under low-light conditions, or in a dark place. In that case,
use a tripod or hold your arms firmly at your side after pressing the shutter button.
Camera
Eye
Retina
Camera
Subject
Particles (dust,
pollen, etc.) in
the air
