107
Tr
ou
bl
es
hoo
tin
g
Troubleshooting
This subject is not visible on the screen.
•
The camera is set to the playback mode. Press
to change to the recording mode (page 35).
Anti-blur function does not work.
•
The anti-blur function does not work when
appears on the display.
•
The anti-blur function may not work properly when shooting night scenes.
•
Shoot after pressing the shutter button halfway down. Do not press it fully down suddenly.
Recording takes a long time.
•
The NR slow shutter function is activated (page 20). This is not a malfunction.
The image is out of focus.
•
The subject is too close. Shoot in
(Macro On) recording mode. Make sure to position the
lens farther away from the subject than the shortest shooting distance, approximately 8 cm
(3 1/4 inches) (W)/25 cm (9 7/8 inches) (T), when shooting (page 30). Otherwise, set the
camera to
(Close focus enabled) mode and shoot by focusing in on the subject at about 1
to 20 cm (13/32 to 7 7/8 inches) from the W side distance (page 30).
•
(Twilight) mode or
(Landscape) mode or
(Fireworks) mode is selected in the Scene
Selection when shooting still images.
•
The Focus preset function is selected. Select the auto focus mode (page 31).
•
Refer to “How to use the [Spot AF]” on page 32.
Zoom does not work.
•
You cannot use the Optical zoom when
(Close focus enabled) mode is selected.
•
You cannot use the Smart zoom when the image size is set to [8M] or [3:2].
•
You cannot use the Digital Zoom, when the Face Detect function is activated.
The flash does not work.
•
The flash is set to
(Flash Off) (page 29).
•
You cannot use the flash when:
–
[REC Mode] is set to [Burst] or Exposure Bracket (page 51).
–
(High Sensitivity) mode or
(Twilight) mode or
(Fireworks) mode is selected in the
Scene Selection (page 49).
–
Shooting in
(Close focus enabled) mode.
–
Shooting movies.
•
Set the flash to (Flash On) when
(Landscape) mode,
(Beach) mode, or
(Snow)
mode is selected in the Scene Selection (page 29).
Fuzzy white circular spots appear in images shot using the flash.
•
Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This
is not a malfunction (page 16).