112
Your camera does not work.
•
Use the type of battery pack you can use with this camera (page 119).
•
The battery level is low (The
E
indicator appears). Charge the battery pack (
t
step 1 in
“Read This First”
).
The power is on, but the camera does not work.
•
The built-in microcomputer is not working properly. Remove the battery pack, and then, after
one minute, insert the battery pack and turn on the camera.
The touch panel buttons do not appear.
•
Press
(on-screen key).
Cannot operate the touch panel buttons correctly or fully. The stylus operation
reacts at inappropriate points.
•
Perform [Calibration] (page 74).
Buttons do not work as they should.
•
[Housing] is set to [On] (page 74).
Cannot identify an indicator on the screen.
•
See page 18.
The lens gets fogged.
•
Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it (page 122).
The camera becomes warm when you use it for a long time.
•
This is not a malfunction.
The Clock Set screen appears when you turn on the camera.
•
Set the date and time again (
t
step 2 in
“Read This First”
).
Others
Summary of Contents for Cyber-shot DSC-N1
Page 130: ...130 ...
Page 131: ...131 ...
