106
You do not know if the OS of your computer is compatible with the camera.
•
Check “Recommended computer environment” on page 76 for Windows, and page 87 for
Macintosh.
You cannot install the USB driver.
•
In Windows 2000, log on as Administrator (authorized Administrators) (page 77).
Nothing appears on the camera screen when a USB connection is made.
•
The switch on the cable for multi-use terminal is set to “TV”. Set to “CAMERA” (page 79).
Your computer does not recognize your camera.
•
Turn on the camera (
t
step 2 in
“Read This First”
).
•
When the battery level is low, install the charged battery pack (
t
step 1 in
“Read This
First”
), or use the AC Adaptor (not supplied) (page 17).
•
Use the supplied cable for multi-use terminal (page 79).
•
Disconnect the cable for multi-use terminal from both the computer and the camera, and
connect it again firmly. Make sure that “USB Mode Mass Storage” is displayed (page 79).
•
Set [USB Connect] to [Mass Storage] in the
(Setup) menu (page 72).
•
Disconnect all equipment other than the camera, the keyboard and the mouse from the USB
connectors of your computer.
•
Connect the camera directly to your computer without passing through a USB hub or other
device (page 79).
•
The USB driver is not installed. Install the USB driver (page 77).
•
Your computer does not properly recognize the device because you connected the camera and
your computer with the cable for multi-use terminal before you installed the “USB Driver”
from the supplied CD-ROM. Delete the erroneously recognized device from your computer,
then install the USB driver (see the next item).
The “Removable disk” icon does not appear on the computer screen when you
connect your computer to the camera.
•
Follow the procedure below to install the USB driver again. The following procedure is for a
Windows computer.
1
Right-click [My Computer] to display the menu, then click [Properties].
The “System Properties” screen appears.
2
Click [Hardware]
t
[Device Manager].
•
For Windows 98/98SE/Me, click the [Device Manager] tab.
The “Device Manager” appears.
3
Right-click [
Sony DSC], then click [Uninstall]
t
[OK].
The device is deleted.
4
Install the USB driver (page 77).
Computers
Summary of Contents for Cyber-shot DSC-N1
Page 130: ...130 ...
Page 131: ...131 ...
