GB
11
GB
1
Press the ON/OFF (Power) button to turn off the camera.
2
Connect the camera to the computer that is turned on with the dedicated
USB connection support cable (supplied).
• The Power/Charge lamp lights up in orange, and charging starts. The Power/
Charge lamp turns off, charging has completed.
• The Power/Charge lamp may turn off when the temperature is outside of the
recommended operating temperature (10°C to 30°C (50°F to 86°F)).
3
When charging is finished, delete the USB connection between the camera
and computer.
• Be careful also of the following points:
– When you connect the camera to a laptop computer that is not connected to an
AC power source, the battery of the laptop computer may be depleted rapidly.
Do not leave the camera connected to the computer for a long time.
– Do not perform start-up, restart, resuming from sleep mode, or shut-down
operations on your computer while the camera is connected. Otherwise the
camera may malfunction. Disconnect the camera from the computer before
performing these operations.
– Charging the battery with customized or hand-built computers is not guaranteed.
x
Charging time
Full charge time: approx. 150 min.
• Time required to charge a fully depleted battery pack at a temperature of 25°C
(77°F). Charging may take longer depending on conditions of use and
circumstances.
• Besides charging the built-in battery, the supplied AC Adaptor can also be used to
supply power in USB and viewing mode. The camera may not work in shooting
mode because of the voltage reduction the AC adaptor.
Note
Notes
Power/Charge
lamp
Dedicated USB connection
support cable
