Top page > Using MENU items (Viewing) > MENU items (Viewing) > Send by TransferJet
Send by TransferJet
Receiving images using TransferJet
Using separately sold TransferJet-compatible devices
TransferJet is a close-up, wireless transfer technology that allows data to be transferred by closely aligning two products that
you want to communicate with each other.
To find out whether your camera is equipped with the TransferJet function, check for the
(TransferJet) mark on the
bottom of the camera.
Using a Memory Stick with TransferJet (sold separately) allows images to be transferred between TransferJet-compatible
devices.
For more details on TransferJet, see the operating instructions supplied with Memory Stick with TransferJet.
1.
Insert a Memory Stick with TransferJet into the camera.
2.
Press the
(Playback) button to switch to playback mode.
3.
MENU
(Send by TransferJet)
desired mode
on the control wheel
4.
Transfer images by closely aligning the
(TransferJet) marks on the camera and other device.
A notification sound is emitted when connection is made.
(This Image)
Sends the currently displayed image in single-image mode.
(Multiple Images)
You can select and send multiple images.
1. After step
3
, select an image to be sent, then press
.
To cancel the selection, press
again to cancel the
mark.
2. MENU
[OK]
Notes
●
Only still images can be transferred.
●
Up to 10 images can be transferred at once. However, for 3D images, both the MPO file and the JPEG file are
transferred. Depending on the receiving device, up to 20 images are received.
●
Set [TransferJet] to [On] in
(Settings).
●
On an airplane, set [Airplane Mode] to [On] (DSC-HX20V/HX30/HX30V only) or set [TransferJet] to [Off] (DSC-HX20
only) in
(Settings)
. In addition, follow the rules of the place where you use.
●
The connection is cut if transfer cannot be made within about 30 seconds. If this happens, select [Yes] and realign the
two
(TransferJet) marks on the camera and another device.
●
The Memory Stick with TransferJet and camera models with TransferJet are not sold in some countries and regions
due to local laws and regulations.
●
Set the [TransferJet] function to [Off] in countries and regions other than where you purchased your camera. Depending
on the country or region, if you use the TransferJet function, you may be liable due to local restrictions on transmission
of electromagnetic waves.
Receiving images using TransferJet
1.
Press the
(Playback) button to switch to playback mode.
2.
Closely align the
(TransferJet) marks on the camera and sending device to receive images.
A notification sound is emitted when connection is made.
Tips for sending and receiving data successfully
Closely align the
(TransferJet) mark on the camera and other device.
150
Summary of Contents for Cyber-shot DSC-HX20
