43
CX-JDS22/JDS33
Pin No.
Pin Name
I/O
Description
1
P96
O
Solenoid control signal output to the tape deck
2
P95
I
PLAY switch signal input from the tape deck
3
P94
I
Record protect detect switch signal input (rear)(JDS22: Not use/JDS33:Use)
4
P93
I
Record protect detect switch signal input (f)
5
P92
I
PACK detect switch signal input
6
P91
O
Tape motor control signal output
7
P90
I
Remote control signal input from the remote sensor
8
BYTE
I
Destination setting input terminal (Connected to ground.)
9
CNVSS
—
Not used
10
XCIN
I
Oscillation circuit signal input for the real time clock
11
XCOUT
O
Oscillation circuit signal output for the real time clock
12
RES
I
Reset signal input
13
XOUT
O
Oscillation circuit signal output for the system main clock
14
VSS
—
Ground terminal
15
XIN
I
Oscillation circuit signal input for the system main clock
16
VCC1
—
Power supply terminal (+3.3 V)
17
P85/NM1
—
Not used (pull up)
18
P84/INT2
I
Clock signal input from the tuner (Connected to ground.)
19
P83/INT1
I
SCOR signal input from the CD unit
20
P82/INT0
I
Power down detection signal input
21
P81
O
Main power control signal output
22
P80
O
AMP control signal output
23
P77
O
Muting control signal output to the tuner Level control signal output for i-Bass
24
P76
O
Bias control signal output to the tape deck
25
P75
O
Playback selection signal output for the tape deck
26
P74
I
Tuner tuned status signal input from the tuner
27
P73/CTS2
I
Stereo detection signal input from the tuner
28
P72/CLK2
O
Clock output to the MP3 IC
29
P71/RXD2
I/O
The MP3 IC data signal
30
P70/TXD2
I/O
The MP3 IC data signal
31
P67/TXD1
O
Data output to the CD unit
32
P66/RXD1
I
SENS signal input from the CD unit
33
P65/CLK1
O
Clock output to the CD unit
34
P64/CTS1
—
Not used
35
P63/TXDO
O
Data output to the LCD driver
36
P62/RXDO
O
Chip select signal output to the LCD driver
37
P61/CLKO
O
Clock signal output to the LCD driver
38
P60/CTSO
O
Data output to the tuner and function IC
39
P57/CLKOUT
O
Clock output to the function IC
40
P56
O
Latch signal output to the tuner
41
P55
—
Not used (pull down)
42
P54
O
Clock output to the tuner
43
P53
I
Data input from the tuner
44
P52
I
RDS signal input from the tuner (Connected to ground.)
45
P51
O
Standby LED control signal output
46
P50
—
Not used (pull up)
47
P47
O
CD motor control signal output
• IC Pin Function Description
PANEL BOARD IC604 M30302MCP-A07FPU0 (SYSTEM CONTROLLER)
All manuals and user guides at all-guides.com
