background image

3

WARNING

You are cautioned that any changes or 
modifications not expressly approved in this 
manual could void your authority to operate 
this equipment.

All interface cables used to connect 
peripherals must be shielded in order to 
comply with the limits for a digital device 
pursuant to Subpart B of Part 15 of FCC 
Rules.

This device complies with Part 15 of the 
FCC Rules. Operation is subject to the 
following two conditions: (1) this device 
may not cause harmful interference, and (2) 
this device must accept any interference 
received, including interference that may 
cause undesired operation.

If you have any questions about this product, 
you may call;

Sony Customer Information Service Center 
1-800-222-7669 or http://www.sony.com/

For the customers in Canada

This Class B digital apparatus complies with 
Canadian ICES-003.

For the customers in Europe

The manufacturer of this product is Sony 
Corporation, 1-7-1 Konan, Minato-ku, 
Tokyo, Japan.
The Authorized Representative for EMC 
and product safety is Sony Deutschland 
GmbH, Hedelfinger Strasse 61, 70327 
Stuttgart, Germany. For any service or 

guarantee matters please refer to the 
addresses given in separate service or 
guarantee documents.

For the State of California, USA only

Perchlorate Material - special handling may 
apply, See

www.dtsc. ca.gov/hazardouswaste/
perchlorate

Perchlorate Material: Lithium battery 
contains perchlorate.

Disposal of the used lamp

For the customers in the USA

Lamp in this product contains mercury. 
Disposal of these materials may be regulated 
due to environmental considerations. For 
disposal or recycling information, please 
contact your local authorities or the 
Electronic Industries Alliance 
(www.eiae.org).

For safety

Be sure to attach the air filter to the unit.

For the customers in Taiwan only

Declaration of Conformity

Trade Name: SONY
Model: VPL-CX100, 

VPL-CX120, 

VPL-CX125, VPL-CX150, 
VPL-CX155, VPL-CW125

Responsible party: 

Sony Electronics Inc.

Address: 

16530 Via Esprillo, San 
Diego, CA 92127U.S.A.

Telephone Number:

858-942-2230

This device complies with part 15 of the 
FCC Rules. Operation is subject to the 
following two conditions: (1) this device 
may not cause harmful interference, and 
(2) this device must accept any interference 
received, including interference that may 
cause undesired operation.

Summary of Contents for CW125 - VPL WXGA LCD Projector







































































Reviews: