23
23
CSX-V58MP
• Waveforms (Servo board)
(MODE:CD PLAY)
•
A
: B+ Line.
• Connector (BUS CONTROL IN) of SONY BUS compat-
ible master unit, etc. to CN101 (BUS CONTROL OUT) of
CSX-V58MP with a BUS cable.
Power voltage is dc 14.4V from ACC and BATT cords of
the SONY BUS compatible master unit, etc. and fed with
regulated dc power supply.
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
• Circled numbers refer to waveforms.
Caution:
Pattern face side: Parts on the pattern face side seen from the
(Side B)
pattern face are indicated.
Parts face side:
Parts on the parts face side seen from the
(Side A)
parts face are indicated.
VIDEO TEST DISC: HLV-401 (TGIS-3)
Part No.: J-6095-031-A
Playback track No.: 34 (Full field color bar 75%)
THIS NOTE IS COMMON FOR PRINTED WIRING
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is
printed in each block.)
for schematic diagram:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
•
%
: indicates tolerance.
•
f
: internal component.
•
C
: panel designation.
• Signal path.
F
: FM
f
: AM
J
: CD AUDIO
L
: CD VIDEO
for printed wiring boards:
•
X
: parts extracted from the component side.
•
Y
: parts extracted from the conductor side.
•
a
: Through hole.
•
: Pattern from the side which enables seeing.
(The other layer’s patterns are not indicated.)
Note:
The components identified
by mark
0
or dotted line with
mark
0
are critical for safety.
Replace only with part num-
ber specified.
