4
Aging Mode
• Mode for repeating operations of the CD player and TC deck automatically.
When errors occur:
Aging stops and a message indicating that an error has occurred such as “CD MEC ERR” is displayed.
(For details of errors, refer to “Error History Display Mode”.)
When no errors occur:
Aging is repeatedly performed.
Procedure:
1. Load any CD and a tape.
2. Select the function “CD” using the FUNCTION knob (TA).
3. While pressing the TUNING MODE button (ST) and
H
button (CDP), press the
?/1
button (TA).
4. “AGING” is displayed on the LCD briefly.
5. Operations are performed in the following sequence during aging.
Every pressing of DISPLAY button (ST) changes the display in the CD display and TAPE display.
Reading of TOC
Playback of first track (3sec.)
Playback of last track (3sec.)
CD tray open
CD tray close
CD :
Cassette :
REW
(Shut off)
"TAPE AG-1"
PLAY
FF
REV PLAY
REW
(20 sec)
"TAPE AG-2"
(20 sec)
"TAPE AG-3"
(20 sec)
"TAPE AG-4"
(20 sec)
"TAPE AG-5"
FF search
REW search
OPEN
CLOSE
(20 sec)
"TAPE AG-6"
(20 sec)
"TAPE AG-7"
"TAPE AG-8"
"TAPE AG-9"
6. To end aging, execute the cold reset.
Error History Display Mode
Mode for checking the history of errors which have occurred in the CD player.
Execute this mode after ending the aging mode.
Procedure:
1. Select the function “CD” using the FUNCTION knob (TA).
2. While pressing the TUNING MODE button (ST) and
S
button (CDP), press the
?
/
1
button (TA).
3. “EMC@@EDC**” id displayed.
@@: Number of mechanism errors (Last 3 errors)
** : Number of errors (NO DISC ERROR) which occurred after chucking (Last 3 errors)
4. To end, press the
?
/
1
button (TA) and turn OFF the power.
5. To erase the error history, perform cold reset.
(While pressing the TUNING MODE button (ST) and
M L
button (CDP), press the
?
/
1
button.)
Summary of Contents for CMT-SP55TC
