background image

7

Getting Started

Step 3:  Presetting radio
stations

You can preset up to 30 stations, 20 for FM and
10 for AM.

>

M

m

N

X

x

?/1

.

5

2

1
4
3

STEREO/
MONO

/–

1

Press TUNER/BAND to select “FM” or
“AM.”

Pressing TUNER/BAND turns on the
system.

2

Press MODE repeatedly until “AUTO”
appears.

F M

7

8

. 5 0

3

Press /–.

The frequency indication changes and the
scanning stops when the system tunes in a
station. “TUNED” and “STEREO” (for a
stereo program) appear.

4

Press MEMORY.

A preset number flashes in the display. The
stations are stored from preset number 1.

M E M O R Y

M

F

1

5

Press ENTER.

“COMPLETE !!” appears, and then the
station is stored.

6

Repeat steps 1 to 5 to preset other
stations.

To stop scanning

Press MODE.

To tune in a station with a weak
signal

Press MODE repeatedly until “MANUAL”
appears in step 2, then press /–
repeatedly to tune in the station manually.

To set another station to an
exist preset number

Start over from step 1. After step 4, press
/– repeatedly to select the preset
number that you want to overwrite to. And then,
press ENTER.

continued

Summary of Contents for CMT-RB5 - Micro Hi Fi Component System

































Reviews: