manualshive.com logo in svg

Sony CMT-M700DVD, Operating Instructions Manual, Page: 83 / 96

Share
Download
Sony CMT-M700DVD Operating Instructions Manual Download Page 83

83

GB

CMT-M700DVD 4-240-065-11(2) GB

Troubleshooting

TAPE

Cannot SYNC!

There is no tape in the tape deck, or the tab has
been removed from the cassette.

No Tab

You cannot record the tape because the tab has
been removed from the cassette.

No Tape

There is no tape in the tape deck.

TUNER

WAIT

The function is switching to the tuner.

Additional Information

Precautions

On operating voltage

Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.

On safety

• The unit is not disconnected from the AC power

source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.

• Unplug the system from the wall outlet (mains) if it

is not to be used for an extended period of time. To
disconnect the power cord (mains lead), pull it out
by the plug. Never pull the cord itself.

• Should any solid object or liquid fall into the

system, unplug the system and have it checked by
qualified personnel before operating it any further.

• AC power cord must be changed only at the

qualified service shop.

On placement

• Do not place the system in an inclined position.
• Do not place the system in locations where it is;

— Extremely hot or cold
— Dusty or dirty
— Very humid
— Subject to vibrations
— Subject to direct sunlight.

• Use caution when placing the unit or speakers on

surfaces that have been specially treated (with wax,
oil, polish, etc.) as staining or discoloraion of the
surface may result.

On heat buildup

• Although the system heats up during operation, this

is not a malfunction.

• Place the system in a location with adequate

ventilation to prevent heat build-up in the system.

If you continuously use this system at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
To prevent a malfunction, do not cover the ventilation
hole for the cooling fan.

On operation

• If the system is brought directly from a cold to a

warm location, or is placed in a very damp room,
moisture may condense on the lens inside the DVD
player. Should this occur, the system will not
operate properly. Remove the disc and leave the
system turned on for about an hour until the
moisture evaporates.

• When you move the system, take out any disc.

If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.

Additional Information

continued

Summary of Contents for CMT-M700DVD

































































































Reviews:

No comments