39
GB
MD – Recording
CMT-M700DVD 4-240-065-11(1) GB
Recording into a new group
You can create new groups by CD album or
artist, etc.
1
Load a recordable MD.
2
Press FUNCTION repeatedly to select
the desired source to record.
• DVD: To record from this system’s
DVD/CD player.
• TAPE: To record from this system’s
cassette deck.
• TUNER: To record from this system’s
tuner.
• OPTICAL IN: To record from the
optional component connected to the
OPTICAL IN jack.
• ANALOG IN: To record from the
optional component connected to the
ANALOG IN jacks.
3
Press GROUP on the remote repeatedly
until “GROUP ON” appears.
4
Press
z
MD (or MD
z
on the remote).
“New Group” flashes and the MD deck
stands by for recording.
5
Press MD
NX
(or MD
N
on the
remote), then start playing the desired
source to record.
To continue recording into another new
group, switch the function to MD after
recording, press
x
(or MD
x
on the
remote) repeatedly until the disc title and
total number of groups appears, then
perform steps 2 to 5.
Recording into an existing group
After step 4, press GROUP SKIP on the remote
repeatedly until the desired group appears, then
proceed to step 5. New tracks are recorded after
the last track in the group.
If “Group Full!” appears when you
press
z
MD (or MD
z
on the remote)
in step 4
You cannot start recording because there is
insufficient character space for group
management.
Delete unnecessary characters (disc title or
track titles) until group recording is possible
(see page 49).
Tips
• You can check the remaining recordable time on the
MD during recording by pressing DISPLAY on the
remote.
• You can adjust the recording level (page 45).
Notes
• The new group is added after any existing groups
with tracks registered.
• Up to 99 groups can be registered on a single MD.
• When you newly record a track into an existing
group, the track numbers following the newly
recorded track may change when the Group
Function is turned off.
• If “Group Full!” appears during recording, track
numbers are not marked.