CMT-LX30iR.GB.4-131-632-11(1)
0
GB
The remote does not function.
Remove any obstacles between the
remote and the remote sensor on the
unit, and position the unit away from
fluorescent lights.
Point the remote at the system’s sensor.
Move the remote closer to the system.
CD/MP3 player
The sound skips, or the disc will not
play.
Wipe the disc clean, and replace it.
Move the system to a location away
from vibration (for example, on top of
a stable stand).
Move the speakers away from the
system, or place them on separate
stands. At high volume, speaker
vibration may cause the sound to skip.
Play does not start from the first
track.
Return to Normal Play by pressing
PLAY MODE repeatedly until both
“PGM” and “SHUF” disappear.
Starting playback takes more time
than usual.
The following discs can increase the
time it takes to start playback.
A disc recorded with a complicated
tree structure
A disc recorded in multisession
mode
A disc that has not been finalized (a
disc to which data can be added)
A disc that has many folders
The system does not eject the disc
and “LOCKED” appears.
Contact your Sony dealer or local
authorized Sony service facility.
iPod
There is no sound.
Make sure the iPod is connected
securely.
Make sure the iPod is playing music.
Adjust the volume.
The sound is distorted.
Turn down the volume.
Set the “EQ” setting of the iPod to
“Off” or “Flat.”
The remote does not function.
Make sure the iPod is updated with the
latest software. If not, update the iPod
before using with the system.
The iPod cannot be charged.
Make sure the iPod is connected
securely.
You can use the system as a battery
charger for iPod only when the system
is on.
“OVER CURRENT” appears.
A problem has been detected with
the level of electrical current from the
iPod connector. Turn off the system
and remove the iPod from the iPod
connector. Make sure there is no
problem with the iPod. If this display
pattern persists, contact your nearest
Sony dealer.
