![background image](http://html.mh-extra.com/html/sony/cmt-lx30ir/cmt-lx30ir_operating-instructions-manual_420393015.webp)
CMT-LX30iR.GB.4-131-632-11(1)
1
GB
Oper
ations
Listening to the radio
1
Select “TUNER FM” or “TUNER
AM.”
Press FU/
repeatedly.
2
Perform tuning.
For automatic scanning
Press TUNING MODE repeatedly
until “AUTO” appears, and then press
+/
(or TUNE +/
on the unit).
Scanning stops automatically when
a station is tuned in, and “TUNED”
and “ST” (for stereo programs only)
appear.
If “TUNED” does not appear and the
scanning does not stop, press
to
stop scanning, then perform manual
tuning (below).
When you tune in a station that
provides RDS services, the station
name appears on the display
(European model only).
For manual tuning
Press TUNING MODE repeatedly
until “MANUAL” appears, and then
press +/
(or TUNE +/
on the
unit) repeatedly to tune in the desired
station.
Tip
To reduce static noise on a weak FM stereo
station, press FM MODE repeatedly until
“MONO” appears to turn off stereo reception.
Presetting a radio station
Use buttons on the remote to preset
stations.
1
Tune in the desired station.
2
Press TUNER MEMORY to select
the tuner memory mode.
Preset number
3
Press +/
repeatedly to select
the desired preset number.
If another station is already assigned
to the selected preset number, the
station is replaced by the new station.
4
Press
to store the station.
5
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM and 10
AM stations. The preset stations are
retained for about half a day even if
you disconnect the power cord or if a
power failure occurs.
6
To call up a preset radio station,
press TUNING MODE repeatedly
until “PRESET” appears, and then
press +/
repeatedly to select
the desired preset number.