background image

12

GB

Labeling a CD (continued)

To erase and change a character

In step 3 or 4, press 

T

CURSOR or

CURSOR

t

 on the remote repeatedly until the

character you want to change flashes. Press
CLEAR on the remote to erase the character,
then repeat steps 3 and 4.

To cancel labeling

Press MENU/NO on the remote.

To add a character

After step 2, press 

T

CURSOR or

CURSOR

t

 on the remote repeatedly to move

the cursor to the place where you want to add a
character. Then proceed to step 3.

Checking the disc titles

1

Press FUNCTION repeatedly to switch
the function to CD.

2

Press MENU/NO on the remote in stop
mode.

3

Press 

.

 or 

>

 on the remote

repeatedly until “Name Check?”
appears, then press ENTER/YES on the
remote.

4

Press 

.

 or 

>

 on the remote

repeatedly to select the disc titles
stored in the system memory between
001 and 100.

To check the current disc title

Press SCROLL on the remote in stop mode.

4

Enter a character.

Type of character

Do this

Uppercase or
lowercase letters

Press the corresponding
letter button on the remote
repeatedly until the
character to be entered
flashes. Or press the button
once and press 

.

 or

>

 repeatedly. Then

press CURSOR

t

 on the

remote.

Numbers

Press the corresponding
number button on the
remote.

Blank space

Press 10/0 on the remote.

Symbols
(‘ – / , . ( ) : ! ?)

Press number 1 on the
remote repeatedly.

Symbols
(& + < > _ = ” ; # $
% @ 

 `)

Press number 1 on the
remote and press 

.

 or

>

 repeatedly. Then

press CURSOR

t

 on the

remote.

5

Repeat steps 3 and 4 to enter the rest
of the name.

6

Press ENTER/YES on the remote.

“Complete!” appears.

Summary of Contents for CMT-EX5 - Micro Hi Fi Component System





























Reviews: