CMT-EH26/EH25.GB.3-874-279-11(1)
GB
O
thers
Starting playback takes more time
than usual.
The following discs take a longer time
to start playback.
a disc recorded with a complicated
tree structure.
a disc recorded in multisession
mode.
a disc that has not been finalized (a
disc to which data can be added).
a disc that has many folders.
Tape deck
The sound exhibits excessive wow or
flutter or dropout.
Clean the capstans and pinch rollers.
Also, clean and demagnetize the tape
heads. See “Precautions” for details.
USB device
Are you using a supported USB
device?
If you connect an unsupported USB
device, the following problems may
occur. See “Playable USB devices
with this system” (page 31) for the
supported device types.
The USB device is not recognized.
File or folder names are not
displayed on this system.
Playback is not possible.
The sound skips.
There is noise.
A distorted sound is output.
“OVER CURRENT” appears.
A problem has been detected with the
level of electrical current from the
(USB) port
. Turn off the system and
remove the USB device from the
(USB) port
. Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
There is no sound.
The USB device is not connected
correctly. Turn off the system , then
reconnect the USB device and check if
“USB” appears.
There is noise, skipping, or distorted
sound.
Turn off the system, then reconnect the
USB device.
The music data itself contains noise,
or the sound is distorted. Noise may
have been introduced when creating
music data due to the conditions of the
computer. Create the music data again.
The bit rate used when encoding the
files was low. Send files encoded with
higher bit rates to the USB device.
The USB device cannot be connected
into the (USB) port
.
The USB device is being connected
backwards. Connect the USB device in
the correct orientation.
Continued
Summary of Contents for CMT-EH25
Page 1: ......
Page 32: ...Printed in China ...
