Basic Operations
19
1
Press
Z
PUSH and insert a recorded
tape into the cassette holder.
With the side you want to
play facing towards you
Z
–
+
n
x
N
.m
X
M>
BAND
TUNE
AM
FM
2
Press FUNCTION repeatedly until
“TAPE” appears.
3
Press DIR MODE on the remote to
select “
g
” to play one side of the tape
or “
j
”* to play both sides
repeatedly.
* The tape automatically stops after playing
back five times.
4
Press
N
.
To start playing the reverse side, press
n
.
The tape starts playing.
To
Do this
Tips
• If you press TAPE
nN
on the remote when the
power is off, the system automatically turns on and
starts playing the tape if there is a tape in the holder
(One Touch Play).
• To switch to the tape while listening to another
source, press TAPE
nN
on the remote while the
tape is stopped. The tape will automatically start
playing (Automatic Source Selection).
• To play a tape recorded with the Dolby NR system,
press DOLBY NR on the remote before step 4.
“
;
” appears.
Remove or replace
the tape
Press
x
.
Pause
Press
Z
PUSH.
Press
X
.
Press again to resume
playback.
Fast-forward or
rewind
With the tape stopped‚ press
.m
/
M>
(or
j
/
J
on the remote).
Locate the begining
of the current or next
track
During playback‚ press
.m
/
M>
(or
l
/
L
on the remote).
Adjust the volume
Stop playback
Press /–.
