T
a
p
e
–
Pla
y/T
ape
– Rec
or
d
ing
19
GB
You can record a whole CD on a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
Press FUNCTION repeatedly to switch
the function to TAPE.
3
Press DIRECTION repeatedly to select
“
g
” to record on one side. Select
“
h
” or “
j
” to record on both sides.
4
Press TAPE
nN
repeatedly to select
recording side, then press TAPE
x
.
If you select both sides recording or front
side recording, press TAPE
nN
repeatedly to light up the
N
indicator, then
press TAPE
x
.
If you record on the reverse side, press
TAPE
nN
repeatedly to light up the
n
indicator, then press TAPE
x
.
5
Press FUNCTION repeatedly to switch
the function to CD and load a disc you
want to record.
When you want to record a group from an
ATRAC CD or MP3 CD, be sure to press
PLAY MODE repeatedly to select
, then
press
+ or – repeatedly to select the
desired group before proceeding.
6
Press CD SYNCHRO.
“SYNC”, “REC” and “
N
” (or “
n
”)
appear. The tape deck stands by for
recording and the CD player pauses for
playback.
7
Press TAPE
X
.
Recording starts.
To stop recording
Press TAPE
x
(or CD
x
).
Tip
If you stop the recording by pressing CD
x
, the tape
stops after making about a 4 seconds blank
(unrecorded) space before stopping.
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 5 and 6,
perform steps 2 to 5 of “Creating your own
program” (page 13).
Tip
If you select both sides recording and the tape reaches
the end of the front side part-way through a track, the
entire track is recorded again from the beginning of the
reverse side.
Tape – Recording
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording
*
* &
GI
