Sony CM-S1100 Operating Instructions Manual Download Page 58

Page: 58 / 84

Setting display options

You can use the features on the Display menu to change the
appearance of the on-screen display.

Setting the banner [F61]

You can change what the banner reads.

Push

to select “Banner” from the

Display menu.

The Banner display appears. The current banner text is
displayed.

Push

again to start editing.

The following message appears, prompting you to
enter a new banner.

Use the number buttons or

to enter the

new banner text.

The banner can be up to 12 characters long.
For details on character entry, see the “Alphanumeric
table” on page 23.

Push

to save the new banner.

The standby display reappears. Your new banner is
displayed.

DISPLAY
Banner
Backlight
Auto-Hyphen

F61

BANNER
---SONY----
(Enter Text)
:Done

F61

BANNER
----SONY----

:Edit

F61

BANNER
My Phone
(Enter Text)
:Done

F61

My Phone
12:34P 12/25
:Saved #s
:Features

Display menu

S2100/50-66final

3/2/98, 10:42 AM

Summary of Contents for CM-S1100





















































































Search results

Summary of Contents for CM-S1100

Reviews:

Brands by name

Popular brands

Sony CM-S1100, Operating Instructions Manual

Search results

Summary of Contents for CM-S1100

Reviews:

Brands by name

Popular brands