manualshive.com logo in svg

Sony CLIE PEG-SJ10, Operating Instructions Manual

Share
Download
Sony CLIE PEG-SJ10 Operating Instructions Manual Download Page 115

Chapter 3

Exchanging and updating data using a HotSync

®

 operation

115

Advanced HotSync

®

 operations

Preparing your computer

The following few steps must be performed to prepare your computer for a
modem HotSync operation. Be sure to perform these steps before you leave
your office or home so that your computer is ready to receive a call from
your CLIÉ handheld.

1

Verify the following, to prepare your computer for a modem
HotSync operation:

• The computer modem is connected to your computer and both the

modem and computer are turned on.

• No communication applications, such as fax or telephony software,

are running on the COM port.

• The computer is disconnected from all online services. This helps to

avoid conflicts with the COM port.

2

Click the HotSync 

 icon in the Windows task tray (bottom-

right corner of the taskbar) and select Modem from the
shortcut menu.

3

Click the HotSync 

 icon in the Windows task tray again

and select Setup from the shortcut menu.

The Setup dialog box is displayed.

4

Click the Modem tab.

Continued on next page

Summary of Contents for CLIE PEG-SJ10































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands